Artificial Stone Adhesive

Artificial Stone Adhesive
Product Introduction:
Sain-Gobain Weber AM01 Stone Adhesive is a cement-based, polymer-modified adhesive specially designed for large-format tiles and stone installations. Utilizing Weber’s "Triple-Graded Formula," it delivers high water retention, excellent mortar coverage, and superior bond strength.
Send Inquiry
Description
Technical Parameters
3fafbd73-4d14-486a-a25e-8f67102161ef

Product Description

 

Sain-Gobain Weber AM01 Stone Adhesive is a cement-based, polymer-modified adhesive specially designed for large-format tiles and stone installations. Utilizing Weber's "Triple-Graded Formula," it delivers high water retention, excellent mortar coverage, and superior bond strength. Certified by both the French A+ Indoor Air Quality standard and the China Environmental Labeling (Ten-ring) program, it ensures a safe and reliable bonding solution for stone installations while protecting indoor environmental quality and household health.

 

Key Features

 

Exceptional Bonding Strength

Offers high adhesive power to securely fix large-format tiles and stone materials, effectively resisting expansion forces caused by thermal movement in artificial stone to prevent hollowing or detachment.

Easy Application & Adjustment

The smooth mortar consistency allows easy pressing and repositioning of stone during installation, ensuring a level surface.

Eco-Friendly & Safe

Certified by two authoritative environmental standards, it contains no harmful volatile substances, safeguarding health during and after installation. Suitable for all indoor environments.

Strong Adaptability

Excellent water retention enables stable performance under varying substrate moisture conditions, forming durable bonds with non-deformable, stable substrates.

 

Suitable Applications

 

Materials

Suitable for marble, artificial stone, and tiles with water absorption ≥0.1%. When used with Weber tile primer, it can also be applied to tiles with water absorption <0.1%. All tiles must comply with GB/T 4100-2015 standards.

Substrates

Compatible with stable, non-deformable substrates such as concrete, cement screed, concrete panels, and brick/masonry, without requiring additional primer treatment.

Environments

Suitable for dry or damp indoor environments, including residential and commercial wall and floor stone installations.

 

Application Guide

 

Tools Required

Notched trowel, rubber mallet, electric mixer, mixing bucket.

Working Conditions

• Apply at 5°C–35°C. Avoid rain, high temperatures, frost, direct sunlight, or strong wind.

• Do not reuse set mortar. Protect fresh installations from disturbance.

 

Substrate Preparation

Substrates must be solid, clean, and free from hollows, cracks, deformation, grease, wax, or frost.
Clean contaminants or release agents with detergent and high-pressure water rinse, then allow to dry. Remove old paint or putty down to the base rendering, rinse, and dry before application.
Repair hollow or cracked areas with mortar and cure for 48 hours. Pre-moisten highly absorbent or hot/dry substrates to a surface-dry/internal-damp state before application.
Application Steps

Clean the back of tiles/stone to remove dust, powder, or contaminants. Rinse with water or lightly grind if necessary, then dry thoroughly.

Slowly add 25kg of powder into 5.5–6L of clean water. Mix with an electric mixer to a smooth, lump-free paste.

 

 
Apply using the thin-bed or double-buttering method
 
01/

Thin-bed method: Use a notched trowel to apply adhesive to the substrate (if flat/plumb), and apply a thin layer to the tile/stone back to fill grooves.

02/

Double-buttering: Apply adhesive to both the substrate and tile/stone back for uneven substrates.

03/

Keep adhesive thickness below 10mm. Press and adjust tiles/stones to ensure full contact and alignment. Maintain 2–3mm joint width.

04/

Use mixed mortar within 3 hours, avoiding high temperatures and direct sunlight. Grout with Weber Colored Grout 1–2 days after installation.

 

Specifications & Storage

Storage: Protect from rain and moisture during transport. Store in a dry environment (RH <70%). For long-term storage, cover with PE film to prevent moisture absorption.

Net Weight

25kg

Compliance

JC/T 547-2017 C2

Shelf Life

1 year in unopened packaging under normal storage and transport conditions.

 

 

Hot Tags: artificial stone adhesive, China artificial stone adhesive manufacturers, suppliers, factory, Ceramic Tile Adhesive, Dark Stone Adhesive, Dark Tile Adhesive, Light tile adhesive, Stone Slab Flexible Adhesive, thinset mortar

Send Inquiry
One-stop service
Warmly welcome your inquiries and visiting
contact us